Crochet Ideas

Materials Needed:

• Worsted weight yarn in red, white (for the stripe), brown (for the stem), and green (for the leaf).
• Crochet hook (3.5 mm or as needed for your yarn).
• Black safety eyes (8mm).
• Fiberfill stuffing.
• Tapestry needle.
• Stitch marker.
• Pink blush or yarn for cheeks (optional).

---

Abbreviations (US Terms):

• MR: Magic ring
• sc: Single crochet
• inc: Increase (2 sc in the same stitch)
• dec: Decrease (sc2tog)
• sl st: Slip stitch

---

Instructions

Apple Body:

1. Using red yarn, make a MR and work 6 sc into the ring. (6 sts)
2. Round 2: Inc in each st around. (12 sts)
3. Round 3: (1 sc, inc) repeat around. (18 sts)
4. Round 4: (2 sc, inc) repeat around. (24 sts)
5. Round 5: (3 sc, inc) repeat around. (30 sts)
6. Rounds 6-9: Sc in each st around. (30 sts)
7. Switch to white yarn for the stripe.
8. Rounds 10-11: Sc in each st around with white yarn. (30 sts)
9. Switch back to red yarn.
10. Rounds 12-16: Sc in each st around. (30 sts)
11. Round 17: (3 sc, dec) repeat around. (24 sts)
12. Round 18: (2 sc, dec) repeat around. (18 sts)
13. Start stuffing firmly.
14. Round 19: (1 sc, dec) repeat around. (12 sts)
15. Round 20: Dec around. (6 sts)
16. Fasten off and sew the opening closed.

---

Stem:

1. Using brown yarn, make a MR and work 6 sc into the ring. (6 sts)
2. Rounds 2-5: Sc in each st around. (6 sts)
3. Fasten off, leaving a long tail for sewing. Attach to the top center of the apple.

---

Leaf:

1. Using green yarn, ch 6.
2. Work into the chains as follows: sc in 2nd ch from the hook, hdc in next, dc in next, hdc in next, sc in the last.
3. Continue on the other side of the chain: hdc, dc, hdc, sc.
4. Fasten off, leaving a long tail. Sew next to the stem.

---

Face:

1. Attach safety eyes between rounds 8-9, about 4 stitches apart.
2. Use black yarn to sew a small smile between the eyes.
3. Add blush or small pink circles with yarn for cheeks if desired.

Materials:

• Yarn:
  • Yellow (main body)
  • Brown (banana tip)
  • White or pale yellow (for the peel interior)
  • Pink (optional for blush details)
• Hook: 2.5mm or size suitable for your yarn.
• Stuffing: Polyester fiberfill.
• Eyes: 8mm safety eyes.
• Needle: Tapestry needle for sewing pieces.
• Stitch Marker: To keep track of rounds.

---

Abbreviations (US Terms):

• MR: Magic Ring
• SC: Single Crochet
• INC: Increase (2 SC in the same stitch)
• DEC: Decrease (SC two stitches together)
• SLST: Slip Stitch
• FO: Fasten Off

---

Instructions

Banana Body:

Start with Brown Yarn (Banana Tip):

1. MR, 6 SC into the ring. (6)
2. [INC] x 6. (12)
3. SC around. (12)
4. Change to Yellow Yarn.
5. SC around for 18 rounds (or desired length). (12)
6. Stuff firmly as you go.
7. DEC x 6. (6)
8. FO and close the opening.

---

Peel (Make 3):

With Yellow Yarn:

1. MR, 6 SC into the ring. (6)
2. [INC] x 6. (12)
3. [SC, INC] x 6. (18)
4. [SC 2, INC] x 6. (24)
5. SC around for 4 rows. (24)
6. Fold the peel in half and SLST at the fold to give a curved shape. FO and leave a long tail for sewing.

---

Eyes and Face:

1. Attach safety eyes between rows 6 and 7 of the banana body, spaced about 3 stitches apart.
2. Using black thread, embroider a small smile below the eyes.
3. Optional: Add small blush circles with pink yarn or embroidery.

---

Assembly:

1. Sew the 3 peels to the top of the banana body, ensuring they overlap slightly for a realistic peeled look.
2. Adjust the peels to fan outward.

---

Finishing Touches:

• Double-check all parts are securely attached.
• Shape and adjust the banana to your liking.

Materials Needed

• Yarn:
  • White (for snowman head)
  • Red (for hat and berries)
  • Green (for wreath and leaves)
  • Orange (for nose)
  • Black (for eyes and smile)
• Crochet hook: Size 3.5mm (E/4)
• Fiberfill for stuffing
• Wooden “Welcome” sign
• Jute twine for hanging
• Small decorative beads (optional)
• Yarn needle
• Scissors
• Hot glue gun (optional for assembly)

---

Abbreviations

• MR: Magic Ring
• ch: Chain
• sc: Single Crochet
• inc: Increase (2 sc in same stitch)
• dec: Decrease (sc two stitches together)
• sl st: Slip Stitch
• st: Stitch

---

Instructions

1. Snowman Head

Using white yarn:

1. Round 1: MR, 6 sc into the ring (6).
2. Round 2: Inc in each st around (12).
3. Round 3: (Sc in next st, inc) around (18).
4. Round 4: (Sc in next 2 st, inc) around (24).
5. Round 5: (Sc in next 3 st, inc) around (30).
6. Round 6-10: Sc in each st around (30).
7. Round 11: (Sc in next 3 st, dec) around (24).
8. Round 12: (Sc in next 2 st, dec) around (18).
9. Round 13: (Sc in next st, dec) around (12).
10. Stuff with fiberfill.
11. Round 14: Dec around (6). Fasten off and weave in the end.

---

2. Snowman Hat

Using red yarn:

1. Round 1: MR, 6 sc into the ring (6).
2. Round 2: Inc in each st around (12).
3. Round 3: (Sc in next st, inc) around (18).
4. Round 4: (Sc in next 2 st, inc) around (24).
5. Round 5-8: Sc in each st around (24).
6. Round 9: Change to white yarn, sc in each st around (24).
7. Fasten off and attach a white pom-pom to the tip of the hat.

---

3. Wreath Base

Using green yarn:

1. Round 1: MR, 6 sc into the ring (6).
2. Round 2: Inc in each st around (12).
3. Round 3: (Sc in next st, inc) around (18).
4. Round 4: (Sc in next 2 st, inc) around (24).
5. Round 5: (Sc in next 3 st, inc) around (30).
6. Fasten off and set aside.

---

4. Berries and Leaves

For berries (make 3):

1. Using red yarn, MR, 6 sc into the ring. Sl st to join and fasten off.

For leaves (make 2):

1. Ch 6.
2. Sc in 2nd ch from hook, hdc in next 2 ch, dc in next ch, sl st in last ch. Fasten off.

---

5. Nose and Features

For nose:

1. Using orange yarn, ch 5.
2. Sc in 2nd ch from hook, sl st in next 3 ch. Fasten off and sew to the center of the head.

Eyes and smile:

1. Use black yarn to stitch the eyes or sew safety eyes.
2. Embroider a smile with black yarn.

---

6. Assembly

1. Attach the hat to the snowman’s head using a yarn needle or glue.
2. Sew the wreath to the base of the snowman’s head.
3. Attach berries and leaves to the wreath.
4. Using jute twine, attach the snowman to the wooden “Welcome” sign.
5. Add beads or any decorative elements to the wreath for extra charm.

---

Your Festive Crochet Snowman Welcome Sign is ready to hang and spread holiday cheer! Enjoy showcasing your masterpiece or gifting it to someone special.

Materials:

• Worsted weight yarn in red, white, black, beige, green, and small amounts of pink for blush
• Crochet hook (size 3.5mm or size appropriate for your yarn)
• Fiberfill stuffing
• Safety eyes (8mm)
• Tapestry needle
• Scissors
• Thin cardboard or plastic canvas for the “Welcome” sign backing
• Fabric glue (optional for securing parts)
• Black embroidery thread for lettering
• Stitch markers (optional)

---

Abbreviations:

• MR: Magic ring
• Ch: Chain
• Sc: Single crochet
• Hdc: Half double crochet
• Dc: Double crochet
• Inc: Increase (2 stitches in the same stitch)
• Dec: Decrease (single crochet two stitches together)
• Sl st: Slip stitch
• St(s): Stitch(es)

---

Instructions:

Santa Head

1. Using beige yarn:
   • Round 1: MR, 6 sc. (6)
   • Round 2: Inc in each st. (12)
   • Round 3: (1 sc, inc) repeat around. (18)
   • Round 4: (2 sc, inc) repeat around. (24)
   • Round 5: (3 sc, inc) repeat around. (30)
   • Round 6-10: Sc in each st. (30)
   • Round 11: (3 sc, dec) repeat around. (24)
   • Round 12: (2 sc, dec) repeat around. (18)
   • Insert safety eyes between Rounds 8 and 9, about 6 stitches apart.
   • Round 13: (1 sc, dec) repeat around. (12)
   • Stuff firmly with fiberfill.
   • Round 14: Dec around. (6) Fasten off, weave the tail into the opening.

---

Santa Hat

1. Using red yarn:
   • Round 1: MR, 6 sc. (6)
   • Round 2: Inc in each st. (12)
   • Round 3: (1 sc, inc) repeat around. (18)
   • Round 4-7: Sc in each st. (18)
   • Round 8: (2 sc, inc) repeat around. (24)
   • Round 9-12: Sc in each st. (24)
   • Round 13: (3 sc, inc) repeat around. (30)
   • Continue until the hat fits snugly over the head.
   • Switch to white yarn and add 2 rounds of sc for the fluffy brim.
   • Fasten off and sew the hat onto the head slightly tilted.

---

Santa Beard

1. Using white yarn:
   • Round 1: MR, 6 sc. (6)
   • Round 2: Inc in each st. (12)
   • Round 3: (1 sc, inc) repeat around. (18)
   • Round 4: (2 sc, inc) repeat around. (24)
   • Create a mustache separately: Ch 6, sc in the 2nd ch from hook, hdc in the next, dc in the next 2 sts, sl st in the last st.
   • Sew the mustache and beard below the eyes.

---

Santa Body

1. Using red yarn:
   • Round 1: MR, 6 sc. (6)
   • Round 2: Inc in each st. (12)
   • Round 3: (1 sc, inc) repeat around. (18)
   • Round 4-9: Sc in each st. (18)
   • Switch to white yarn for a fur trim, add 2 rounds of sc.
   • Fasten off, leaving a long tail to sew onto the head.

---

Legs and Boots (Make 2)

1. Boots (Black yarn):
   • Round 1: MR, 6 sc. (6)
   • Round 2: Inc in each st. (12)
   • Round 3-5: Sc in each st. (12)
   • Switch to red yarn for legs and add 4 rounds of sc. Stuff lightly.
   • Fasten off and sew to the body.

---

Arms (Make 2)

1. Using beige yarn:
   • Round 1: MR, 6 sc. (6)
   • Round 2-3: Sc in each st. (6)
   • Switch to red yarn and sc for 6 more rounds. Stuff lightly.
   • Fasten off and sew onto the body.

---

Welcome Sign

1. Using beige yarn:
   • Ch 31, turn.
   • Row 1-10: Sc in each st. (30)
   • Fasten off, leaving a long tail.
   • Back with cardboard or plastic canvas for stiffness.
   • Use black embroidery thread to stitch “WELCOME” onto the front.

---

Holly and Berries

1. Holly Leaves (Green yarn):
   • Ch 7, sc in the 2nd ch from hook, hdc in the next, dc in the next 2 sts, hdc in the next, sc in the last. Fasten off.
2. Berries (Red yarn):
   • MR, 6 sc, sl st to close. Fasten off.
   • Sew leaves and berries onto Santa’s hat.

---

Assembly

• Attach the head to the body securely.
• Sew the arms on either side of the body.
• Attach the legs to the bottom of the body.
• Position and sew the “Welcome” sign below Santa’s hands.
• Add a loop of red yarn at the top of Santa’s head for hanging.

---

Enjoy crafting your adorable Crochet Santa Welcome Sign!

Materials Needed

• Yarn:
  • Light Blue (Main Body)
  • Cream (Roof and accents)
  • White (Windows and details)
  • Brown (Wheels and bumpers)
  • Black (Tires)
• Crochet Hook: 2.5 mm or size suitable for the yarn.
• Stuffing: Polyester fiberfill for stuffing.
• Stitch Markers: To keep track of your rounds.
• Embroidery Thread: For the small logo and details.
• Safety Eyes: Small size for headlights (optional: silver buttons).
• Tapestry Needle: For sewing pieces together.
• Scissors.

---

Abbreviations

• ch: Chain
• sc: Single Crochet
• inc: Increase (2 sc in the same stitch)
• dec: Decrease (sc 2 stitches together)
• sl st: Slip Stitch
• st: Stitch
• FLO: Front Loop Only
• BLO: Back Loop Only
• MR: Magic Ring

---

Instructions

Base of the Kombi

1. Using brown yarn for the bottom of the van:
   • Round 1: MR, 6 sc in the ring. (6 st)
   • Round 2: Inc in each st around. (12 st)
   • Round 3: (1 sc, inc) repeat around. (18 st)
   • Round 4: (2 sc, inc) repeat around. (24 st)
   • Round 5: Continue increasing evenly to 48 st, ensuring the base is oval-shaped by adding extra increases at both ends.
2. Switch to light blue yarn for the main body:
   • Rounds 6–12: Sc in BLO around to build the walls of the Kombi. (48 st per round)

Body of the Kombi

1. Main Body with Light Blue:
   • Round 13: Switch to light blue, sc evenly for 12 rounds to form the Kombi’s height.
   • Round 14: Use white yarn in the middle to create a window effect for the top portion (around 4–6 rows). This creates the window section.
2. Cream Yarn for the Roof:
   • Switch to cream yarn for the roof.
   • Continue sc for 6–8 rounds, decreasing slightly to curve the roof.

Windows

1. Using white yarn:
   • Ch 10, turn and sc in each st back. Repeat for 3 rows to create a rectangle.
   • Create 4 windows and sew onto the light blue body at even intervals.

Wheels

1. Using black yarn for the tires:
   • Round 1: MR, 6 sc in the ring. (6 st)
   • Round 2: Inc in each st around. (12 st)
   • Round 3: Add brown yarn, sc in BLO for 2 rounds to create depth.
2. Attach the wheels to the base.
   • Place them evenly on both sides using a tapestry needle.

Headlights

1. Using white yarn or small safety eyes/buttons:
   • Round 1: MR, 6 sc in the ring.
   • Attach to the front, evenly spaced.
2. Optional: Embroider a small VW logo between the headlights with embroidery thread.

Details

1. Side Mirrors:
   • Using white yarn, ch 5 and sc around to form a small circle.
   • Attach to both sides of the windshield area.
2. Bumpers:
   • Use brown yarn, ch 15, sc across, and attach to the front and back base.
3. Wheels and Hubcaps:
   • For hubcaps, use small silver buttons or embroider white circles on the wheels.
4. Windows Dividers:
   • With embroidery thread, sew straight lines across the white window panels.

---

Assembly

1. Stuff the Kombi Body:
   • Use polyester fiberfill to stuff the body firmly to hold its shape.
2. Attach Roof to Body:
   • Use cream yarn and a tapestry needle to securely stitch the roof to the body.
3. Attach Wheels, Bumpers, and Headlights:
   • Place them symmetrically on both sides of the body.
4. Add Final Details:
   • Embroider any additional designs (e.g., a small flower emblem, license plate, etc.) to match the Kombi’s charm.

---

Finishing Touches

• Ensure all pieces are securely fastened to avoid loose threads.
• Adjust shaping by hand to make sure the Kombi looks neat and symmetrical.

---

This detailed recipe ensures your Iconic Kombi Crochet is as close as possible to the image, bringing a timeless, handmade piece of nostalgia to your collection!

Materials:

• Yarn:
  • Light brown for the body and head
  • Dark brown for the antlers
  • Red for the sweater
  • White for sweater trim and details
  • Green for holly leaves
  • Small amounts of black for eyes and hooves
• Crochet hook: Size 2.5mm or 3mm
• Fiberfill stuffing
• Safety eyes (10mm)
• Tapestry needle
• Scissors
• Stitch markers
• Optional: Small red pom-poms for the holly decoration

---

Abbreviations:

• ch: Chain
• sc: Single crochet
• inc: Increase (2 sc in the same stitch)
• dec: Decrease (sc 2 together)
• st: Stitch
• sl st: Slip stitch
• (…): Repeat instructions within parentheses
• []: Total number of stitches in the round

---

Head:

1. Start with light brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Round 2: Inc in each st around. [12]
4. Round 3: (1 sc, inc) around. [18]
5. Round 4: (2 sc, inc) around. [24]
6. Round 5: (3 sc, inc) around. [30]
7. Rounds 6-12: Sc in each st around. [30]
8. Round 13: (3 sc, dec) around. [24]
9. Round 14: (2 sc, dec) around. [18]
10. Add safety eyes between rounds 8 and 9, approximately 6 stitches apart.
11. Round 15: (1 sc, dec) around. [12]
12. Stuff the head firmly.
13. Round 16: Dec around. [6]
14. Fasten off and weave in the ends.

---

Body:

1. Use light brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Round 2: Inc in each st around. [12]
4. Round 3: (1 sc, inc) around. [18]
5. Round 4: (2 sc, inc) around. [24]
6. Rounds 5-9: Sc in each st around. [24]
7. Round 10: (2 sc, dec) around. [18]
8. Round 11: (1 sc, dec) around. [12]
9. Stuff the body firmly.
10. Round 12: Dec around. [6]
11. Fasten off, leaving a long tail for sewing.

---

Legs (Make 4):

1. Use light brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Round 2: (1 sc, inc) around. [9]
4. Rounds 3-5: Sc in each st around. [9]
5. Switch to black yarn.
6. Rounds 6-8: Sc in each st around. [9]
7. Stuff lightly and fasten off, leaving a long tail for sewing.

---

Arms (Make 2):

1. Use light brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Round 2: (1 sc, inc) around. [9]
4. Rounds 3-7: Sc in each st around. [9]
5. Stuff lightly and fasten off, leaving a long tail for sewing.

---

Antlers (Make 2):

1. Use dark brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Rounds 2-6: Sc in each st around. [6]
4. Stuff lightly as you go.
5. Fasten off, leaving a long tail for sewing.

---

Ears (Make 2):

1. Use light brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Round 2: (1 sc, inc) around. [9]
4. Rounds 3-5: Sc in each st around. [9]
5. Flatten and fasten off, leaving a tail for sewing.

---

Tail:

1. Use light brown yarn.
2. Round 1: Make a magic ring, 6 sc into the ring. [6]
3. Rounds 2-3: Sc in each st around. [6]
4. Stuff lightly and fasten off, leaving a tail for sewing.

---

Sweater:

1. Use red yarn.
2. Round 1: Ch 24 and join with a sl st to form a circle. [24]
3. Rounds 2-5: Sc in each st around. [24]
4. Add white trim: Join white yarn and sc in each st around.
5. Fasten off and weave in the ends.

---

Assembly:

1. Attach the head to the body using a tapestry needle.
2. Sew the arms and legs to the body.
3. Attach the antlers and ears to the top of the head.
4. Sew the tail to the back of the body.
5. Put the sweater on the reindeer and secure it with a few stitches.
6. Add holly leaves and pom-poms to the sweater for decoration.

Materials:

• Yarn: Red, white, green, beige (for skin tone), brown (for hair)
• Crochet hook: 2.5mm
• Polyester stuffing
• Stitch marker
• Scissors
• Sewing needle
• Safety eyes (10mm)
• White lace or embroidery thread (for wings)
• Small red beads (for holly)
• Optional: Fabric stiffener for wings

---

Abbreviations:

• MR: Magic ring
• SC: Single crochet
• INC: Increase (2 SC in the same stitch)
• DEC: Decrease (single crochet 2 stitches together)
• CH: Chain
• SL ST: Slip stitch
• FO: Fasten off

---

Head:

1. With beige yarn:
   • R1: MR, 6 SC (6)
   • R2: INC in each stitch (12)
   • R3: (SC, INC) x6 (18)
   • R4: (2 SC, INC) x6 (24)
   • R5: (3 SC, INC) x6 (30)
   • R6-11: SC around (30)
   • Insert safety eyes between R9 and R10, about 6 stitches apart.
   • R12: (3 SC, DEC) x6 (24)
   • R13: (2 SC, DEC) x6 (18)
   • R14: (SC, DEC) x6 (12)
   • Stuff the head.
   • R15: DEC around (6). FO and close.

---

Body:

1. With red yarn:
   • R1: MR, 6 SC (6)
   • R2: INC in each stitch (12)
   • R3: (SC, INC) x6 (18)
   • R4: (2 SC, INC) x6 (24)
   • R5-10: SC around (24)
   • Change to white yarn.
   • R11-12: SC around (24)
   • R13: (2 SC, DEC) x6 (18)
   • R14: (SC, DEC) x6 (12)
   • Stuff the body.
   • R15: DEC around (6). FO and close.

---

Arms (Make 2):

1. With beige yarn:
   • R1: MR, 6 SC (6)
   • R2-4: SC around (6)
   • Change to red yarn.
   • R5-10: SC around (6)
   • Stuff lightly. FO, leaving a tail for sewing.

---

Legs (Make 2):

1. With beige yarn:
   • R1: MR, 6 SC (6)
   • R2: INC in each stitch (12)
   • R3: SC around (12)
   • Change to white yarn.
   • R4-6: SC around (12)
   • Change to red yarn.
   • R7-10: SC around (12)
   • Stuff and FO, leaving a tail for sewing.

---

Hat:

1. With red yarn:
   • R1: MR, 6 SC (6)
   • R2: INC in each stitch (12)
   • R3: (SC, INC) x6 (18)
   • R4: (2 SC, INC) x6 (24)
   • R5-12: SC around (24)
   • Change to white yarn.
   • R13: SC around (24)
   • FO. Add a white pom-pom at the tip.

---

Hair:

1. With brown yarn:
   • R1: MR, 6 SC (6)
   • R2: INC in each stitch (12)
   • R3: (SC, INC) x6 (18)
   • R4: (2 SC, INC) x6 (24)
   • R5: SC around (24)
   • FO, leaving a tail for sewing. Sew onto the head, leaving space for the hat.

---

Wings:

1. With white lace or embroidery thread:
   • CH 6.
   • R1: SC in the second chain from the hook and across (5).
   • R2: CH 1, INC, SC 3, INC (7).
   • R3: CH 1, INC, SC 5, INC (9).
   • FO and repeat for the second wing. Attach to the back of the body.
   • Optional: Stiffen the wings with fabric stiffener for a firm look.

---

Assembly:

1. Sew the head to the body.
2. Attach the arms and legs.
3. Place the hat on the head, slightly tilted.
4. Sew on the wings to the back.
5. Add a holly embellishment to the dress: Crochet small leaves (green yarn) and attach red beads.
6. Use black embroidery thread to sew the mouth and eyelashes.

Materials Needed:

• Multicolor yarn (for the owl’s body)
• White yarn (for eyes and feathers)
• Black yarn (for wings)
• Orange yarn (for the beak and feet)
• Pink yarn (for the flower)
• Crochet hook (size 3.0 mm or suitable for your yarn)
• Safety eyes (18 mm or similar size)
• Fiberfill stuffing
• Weights (e.g., small bag of rice or pebbles) to make it a door stop
• Yarn needle
• Stitch marker (optional)
• Scissors

---

Abbreviations:

• MR: Magic Ring
• CH: Chain
• SC: Single Crochet
• HDC: Half Double Crochet
• DC: Double Crochet
• TR: Treble Crochet
• INC: Increase (2 SC in the next stitch)
• DEC: Decrease (SC 2 together)
• SL ST: Slip Stitch
• FO: Fasten Off

---

Step 1: Body (Main Part)

1. Round 1: With multicolor yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Round 4: SC in the next 2 stitches, INC in the next stitch, repeat around. (24 stitches)
5. Round 5: SC in the next 3 stitches, INC in the next stitch, repeat around. (30 stitches)
6. Continue increasing until you reach 60 stitches per round.
7. Rounds 11-25: SC in each stitch around. (60 stitches)
8. Round 26: SC in the next 8 stitches, DEC, repeat around. (54 stitches)
9. Round 27: SC in the next 7 stitches, DEC, repeat around. (48 stitches)
10. Add weights to the bottom and stuff the body with fiberfill as you continue.
11. Round 28: SC in the next 6 stitches, DEC, repeat around. (42 stitches)
12. Round 29: SC in the next 5 stitches, DEC, repeat around. (36 stitches)
13. Round 30: SC in the next 4 stitches, DEC, repeat around. (30 stitches)
14. FO, leaving a tail. Weave the hole closed securely.

---

Step 2: Wings (Make 2)

1. Round 1: With black yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Rounds 4-7: SC in each stitch around. (18 stitches)
5. FO, leaving a long tail for sewing. Sew the wings to the sides of the body.

---

Step 3: Eyes (Make 2)

1. Round 1: With white yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Round 4: SC in the next 2 stitches, INC in the next stitch, repeat around. (24 stitches)
5. FO, leaving a long tail for sewing. Attach safety eyes to the center of each white eye piece and sew to the body.

---

Step 4: Beak

1. Round 1: With orange yarn, make a magic ring and work 4 SC into the ring. (4 stitches)
2. Round 2: INC in each stitch around. (8 stitches)
3. Rounds 3-4: SC in each stitch around. (8 stitches)
4. FO, leaving a long tail. Sew the beak just below the eyes.

---

Step 5: Feet (Make 2)

1. Round 1: With orange yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Rounds 3-5: SC in each stitch around. (12 stitches)
4. FO, leaving a long tail. Lightly stuff and sew the feet to the bottom of the body.

---

Step 6: Feathers

1. Row 1: With white yarn, CH 5.
2. Row 2: Starting from the second CH, work SC, HDC, DC, and TR across. (4 stitches)
3. FO, leaving a long tail. Make multiple feathers and sew them in rows to the front of the body for a textured effect.

---

Step 7: Flower (Optional)

1. Round 1: With pink yarn, make a magic ring and work CH 3, SL ST into the ring, repeat 5 times to form 5 petals.
2. FO, leaving a tail. Sew the flower to one ear.

---

Final Assembly

1. Attach the handle to the top of the owl if desired, crocheting or sewing it securely.
2. Weave in all loose ends and trim excess yarn for a neat finish.

Your Crochet Owl Door Stop is now complete! This functional and charming piece is ready to decorate your home while keeping doors in place. Enjoy!

Skill Level: Intermediate
Finished Size: Approx. 25 cm (10 inches) tall

Materials Needed:

• White yarn (main body)
• Black yarn (spots and tail)
• Pink yarn (snout and inner ears)
• Gray yarn (ears and patches)
• Orange yarn (hooves)
• Brown yarn (horns)
• Small amounts of green, blue, yellow yarn (flowers)
• Safety eyes (12 mm or suitable size)
• Crochet hook (size 2.5 mm or 3.0 mm)
• Yarn needle
• Fiberfill stuffing
• Weights (e.g., small bag of rice or stones) to make it a door stop
• Scissors
• Stitch marker (optional)

---

Abbreviations:

• MR: Magic Ring
• CH: Chain
• SC: Single Crochet
• HDC: Half Double Crochet
• INC: Increase (2 SC in the next stitch)
• DEC: Decrease (SC 2 together)
• SL ST: Slip Stitch
• FO: Fasten Off

---

Step 1: Head

1. Round 1: With white yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Round 4: SC in the next 2 stitches, INC in the next stitch, repeat around. (24 stitches)
5. Round 5: SC in the next 3 stitches, INC in the next stitch, repeat around. (30 stitches)
6. Rounds 6-12: SC in each stitch around. (30 stitches)
7. Round 13: SC in the next 3 stitches, DEC, repeat around. (24 stitches)
8. Round 14: SC in the next 2 stitches, DEC, repeat around. (18 stitches)
9. Insert the safety eyes between rounds 7 and 8, spaced about 7 stitches apart.
10. Round 15: SC in the next stitch, DEC, repeat around. (12 stitches)
11. Stuff firmly with fiberfill.
12. Round 16: DEC around. (6 stitches)
13. FO, leaving a tail. Use the tail to close the hole securely.

---

Step 2: Body

1. Round 1: With white yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Round 4: SC in the next 2 stitches, INC in the next stitch, repeat around. (24 stitches)
5. Rounds 5-10: SC in each stitch around. (24 stitches)
6. Round 11: SC in the next 2 stitches, DEC, repeat around. (18 stitches)
7. Round 12: SC in each stitch around. (18 stitches)
8. Insert weights to the bottom of the body and stuff the rest with fiberfill.
9. Round 13: SC in the next stitch, DEC, repeat around. (12 stitches)
10. FO, leaving a tail. Attach the body to the head securely.

---

Step 3: Legs (Make 4)

1. Round 1: With orange yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Rounds 3-4: SC in each stitch around. (12 stitches)
4. Change to white yarn.
5. Rounds 5-10: SC in each stitch around. (12 stitches)
6. Stuff lightly and FO, leaving a tail. Attach all four legs to the base of the body.

---

Step 4: Ears (Make 2)

1. Round 1: With gray yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Rounds 3-4: SC in each stitch around. (12 stitches)
4. FO, leaving a tail. Attach the ears to the sides of the head.

---

Step 5: Horns (Make 2)

1. Round 1: With brown yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Rounds 2-4: SC in each stitch around. (6 stitches)
3. FO, leaving a tail. Attach the horns above the ears.

---

Step 6: Snout

1. Round 1: With pink yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Rounds 4-5: SC in each stitch around. (18 stitches)
5. FO, leaving a tail. Lightly stuff and sew the snout to the lower part of the face. Use black yarn to embroider nostrils and a smile.

---

Step 7: Tail

1. With black yarn, CH 10.
2. Row 1: SC in each CH across.
3. Add a tassel at the end of the tail and attach it to the back of the body.

---

Step 8: Flowers (Optional)

1. For each flower, use a bright yarn color and CH 4.
2. Round 1: Work 10 HDC into the first chain.
3. FO and attach the flowers to the top of the cow’s head.

---

Final Assembly

1. Attach all parts securely, making sure the weight is evenly distributed to keep the cow stable as a door stop.
2. Weave in all loose ends and trim excess yarn for a neat finish.

Your crochet cow door stop is now complete! This adorable and functional creation is ready to bring charm to your home while keeping your doors in place. Enjoy!

4o

Skill Level: Intermediate

Materials Needed:

• Green yarn (for the Grinch’s body)
• Red yarn (for the hat and scarf)
• White yarn (for the hat trim and cuffs)
• Black yarn (for eyebrows and nose)
• Small amount of beige or light brown yarn (for the gift box)
• Crochet hook (size suited for your yarn, typically 2.5 mm or 3.0 mm)
• Safety eyes (8 mm or similar size)
• Fiberfill stuffing
• Yarn needle
• Scissors
• Stitch marker (optional)

---

Abbreviations

• MR: Magic Ring
• CH: Chain
• SC: Single Crochet
• HDC: Half Double Crochet
• INC: Increase (2 SC in the next stitch)
• DEC: Decrease (SC 2 together)
• SL ST: Slip Stitch
• FO: Fasten Off

---

Step 1: Head

1. Round 1: With green yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Round 4: SC in the next 2 stitches, INC in the next stitch, repeat around. (24 stitches)
5. Round 5: SC in the next 3 stitches, INC in the next stitch, repeat around. (30 stitches)
6. Rounds 6-12: SC in each stitch around. (30 stitches)
7. Round 13: SC in the next 3 stitches, DEC, repeat around. (24 stitches)
8. Round 14: SC in the next 2 stitches, DEC, repeat around. (18 stitches)
9. Insert Safety Eyes: Place the eyes between rounds 9 and 10, spacing them about 5 stitches apart.
10. Round 15: SC in the next stitch, DEC, repeat around. (12 stitches)
11. Stuff the Head Firmly with fiberfill.
12. Round 16: DEC around. (6 stitches)
13. Finish Off: FO, leaving a long tail. Use the yarn needle to close the hole securely.

Step 2: Body

1. Round 1: With green yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: INC in each stitch around. (12 stitches)
3. Round 3: SC in the next stitch, INC in the next stitch, repeat around. (18 stitches)
4. Rounds 4-10: SC in each stitch around. (18 stitches)
5. Round 11: SC in the next stitch, DEC, repeat around. (12 stitches)
6. Stuff the Body Firmly with fiberfill.
7. Round 12: DEC around. (6 stitches)
8. Finish Off: FO, leaving a tail for sewing. Attach the body to the head.

Step 3: Arms (Make 2)

1. Round 1: With green yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Rounds 2-7: SC in each stitch around. (6 stitches)
3. Change to White Yarn: Add 1 round of SC in white for the cuff.
4. Finish Off: FO, leaving a long tail. Lightly stuff the arms and attach them to each side of the body.

Step 4: Legs (Make 2)

1. Round 1: With green yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Rounds 2-5: SC in each stitch around. (6 stitches)
3. Finish Off: FO, leaving a long tail. Lightly stuff the legs and sew them to the bottom of the body.

Step 5: Santa Hat

1. Round 1: With red yarn, make a magic ring and work 4 SC into the ring. (4 stitches)
2. Round 2: SC in the next stitch, INC in the next stitch, repeat around. (6 stitches)
3. Round 3: SC in each stitch around. (6 stitches)
4. Round 4: SC in the next stitch, INC in the next stitch, repeat around. (9 stitches)
5. Continue Increasing: Continue to increase gradually until the hat reaches a width that fits the head comfortably.
6. Add White Trim: Change to white yarn and work 1 round of SC around the bottom for the hat trim.
7. Finish Off: FO, leaving a long tail. Attach a small white pom-pom at the tip of the hat, then sew the hat to the Grinch’s head.

Step 6: Scarf

1. With red yarn, CH 35 (or to your desired length).
2. Row 1: SC in each CH across.
3. Finish Off: FO and add small white tassels on each end. Tie or sew the scarf around the Grinch’s neck.

Step 7: Eyebrows and Nose

1. Eyebrows: Use black yarn to create thick, arched eyebrows above the safety eyes, giving the Grinch his iconic grouchy expression.
2. Nose: With black yarn, embroider a small oval or dot between the eyes for the nose.

Step 8: Gift Box

1. Round 1: With beige or light brown yarn, make a magic ring and work 6 SC into the ring. (6 stitches)
2. Round 2: SC in the next stitch, INC in the next stitch, repeat around. (9 stitches)
3. Rounds 3-5: SC in each stitch around to form a small cube.
4. Finish Off: FO, leaving a long tail. Lightly stuff the cube and close the top.
5. Ribbon: With red yarn, embroider two lines around the box (horizontal and vertical) and add a small bow on top. Attach the gift to one of the Grinch’s hands.

Final Assembly

1. Secure All Parts: Make sure all parts are securely attached and that the stuffing is even.
2. Weave in Loose Ends: Trim and weave in all yarn tails for a neat finish.

Your Grinch crochet amigurumi is now complete! This mischievous little Grinch, holding a wrapped gift, will bring a unique and fun twist to your holiday decor. Enjoy your new holiday companion!