Hat

Materials Needed:

• Yarn in green, purple, black, orange, and yellow
• Crochet hook size H (5.0 mm)
• Tapestry needle
• Scissors
• Stitch markers

Hat Body:

1. Tip of the Hat:
   • With green yarn, make a magic ring.
   • Round 1: 6 sc in ring. Pull tight to close.
   • Round 2: 2 sc in each st around (12 sc).
   • Round 3: Sc in next st, 2 sc in next st around (18 sc).
   • Round 4: Sc in next 2 sts, 2 sc in next st around (24 sc).
   • Continue increasing rounds, adding 6 sc evenly spaced each round until the base of the hat reaches the desired circumference.
2. Body of the Hat:
   • Once the base circumference is reached, continue to crochet in rounds without increasing until the hat reaches the desired height.
   • Fasten off.

Hat Brim:

1. Starting the Brim:
   • Attach green yarn to the last round of the hat body.
   • Round 1: Sc in next 3 sts, 2 sc in next st around.
   • Round 2: Sc in next 4 sts, 2 sc in next st around.
   • Continue increasing rounds, adding 1 additional stitch between increases each round until the brim is wide enough.
2. Finishing the Brim:
   • Fasten off and weave in ends.

Hat Band:

1. Creating the Band:
   • With purple yarn, ch enough to fit around the base of the hat.
   • Row 1: Sc in second ch from hook and across. Ch 1, turn.
   • Rows 2-4: Sc in each st across. Ch 1, turn.
   • Fasten off and sew the ends together. Slide the band onto the hat and sew in place.

Decorations:

1. Pumpkin:
   • With orange yarn, make a magic ring.
   • Round 1: 6 sc in ring. Pull tight to close.
   • Round 2: 2 sc in each st around (12 sc). Fasten off.
   • Sew a small jack-o’-lantern face onto the pumpkin using black yarn.
2. Bat:
   • With black yarn, ch 4.
   • Row 1: Sc in second ch from hook, hdc in next ch, dc in last ch.
   • Row 2: Ch 3, sl st in the top of the dc from Row 1, sc in same st, sl st in same st, sc in next st, sl st in same st.
   • Fasten off and weave in ends.
   • Attach the bat to the hat.
3. Stars and Buckle:
   • For stars, use yellow yarn to embroider small star shapes onto the hat.
   • For the buckle, with yellow yarn, ch 10.
   • Row 1: Sc in second ch from hook and across (9 sc). Fasten off.
   • Sew the ends together to form a loop and attach it to the hat band.

Assembly:

• Attach all decorations securely to the hat using a tapestry needle and matching yarn.
• Ensure all ends are woven in and trim any excess yarn.

Your Halloween witch hat crochet project is complete! Enjoy wearing your festive handmade hat and the fun it brings to your Halloween celebrations.

Materials Needed:

• Yarn in beige, orange, black, and yellow
• Crochet hook size H (5.0 mm)
• Tapestry needle
• Scissors
• Stitch markers

Hat Body:

1. Tip of the Hat:
   • With beige yarn, make a magic ring.
   • Round 1: 6 sc in ring. Pull tight to close.
   • Round 2: 2 sc in each st around (12 sc).
   • Round 3: Sc in next st, 2 sc in next st around (18 sc).
   • Round 4: Sc in next 2 sts, 2 sc in next st around (24 sc).
   • Continue increasing rounds, adding 6 sc evenly spaced each round until the base of the hat reaches the desired circumference.
2. Hat Brim:
   • Switch to orange yarn.
   • Round 1: Sc in next 3 sts, 2 sc in next st around.
   • Round 2: Sc in next 4 sts, 2 sc in next st around.
   • Round 3: Sc in next 5 sts, 2 sc in next st around.
   • Continue increasing rounds until the brim is wide enough.
3. Brim Edge:
   • Switch to beige yarn for a decorative edge.
   • Round 1: Sc in each st around.
   • Fasten off and weave in ends.

Buckle:

1. Base:
   • With yellow yarn, ch 10.
   • Row 1: Sc in second ch from hook and across (9 sc). Ch 1, turn.
   • Rows 2-4: Sc in each st across. Ch 1, turn.
   • Fasten off and sew ends together to form a square.
2. Attachment:
   • Sew the buckle onto the black band, centered at the front of the hat.

Bat Appliqués:

1. Bats:
   • With black yarn, ch 4.
   • Row 1: Sc in second ch from hook, hdc in next ch, dc in last ch.
   • Row 2: Ch 3, sl st in the top of the dc from Row 1, sc in same st, sl st in same st, sc in next st, sl st in same st.
   • Fasten off and weave in ends.
   • Make several bats and sew them onto the hat.

Assembly:

1. Hat Band:
   • With black yarn, ch enough to fit around the base of the hat.
   • Row 1: Sc in second ch from hook and across. Ch 1, turn.
   • Rows 2-4: Sc in each st across. Ch 1, turn.
   • Fasten off and sew the ends together. Slide the band onto the hat and sew in place.
2. Finishing Touches:
   • Sew bats onto the hat for decoration.
   • Add any additional embellishments as desired.

Your Halloween witch hat crochet project is complete! Wear your handmade witch hat with pride and enjoy the festive spirit it brings to your Halloween celebrations.

Materials:

• Black worsted weight yarn
• Orange worsted weight yarn
• 5mm crochet hook
• Yarn needle
• Stitch marker

Abbreviations:

• ch: chain
• sc: single crochet
• inc: increase (2 sc in the same stitch)
• sl st: slip stitch

Instructions:

Hat Base:

1. Magic Ring: Start with a magic ring using black yarn.
2. Round 1: 6 sc into the magic ring. (6 sts)
3. Round 2: Inc in each stitch around. (12 sts)
4. Round 3: 1 sc, inc around. (18 sts)
5. Round 4: 2 sc, inc around. (24 sts)
6. Continue increasing 6 stitches each round (3 sc, inc for Round 5, 4 sc, inc for Round 6, and so on) until you reach 60 sts or desired circumference for the hat’s top.

Hat Height:

1. Once you reach the desired circumference, work even (1 sc in each stitch) until the hat measures about 10-12 inches tall, adjusting for the desired hat height and curl.

Brim:

1. Round 1: 5 sc, inc around. (72 sts)
2. Round 2: 6 sc, inc around. (84 sts)
3. Continue increasing 12 stitches each round until the brim is the desired width.
4. Last Round: Work 1 round of sc in each stitch for a firm edge.
5. Fasten off and weave in ends.

Orange Band:

1. Using orange yarn, ch enough to fit snugly around the hat (about 80 ch).
2. Join with a sl st to form a ring, being careful not to twist the chain.
3. Work 1 sc in each ch around.
4. Fasten off and weave in ends.

Buckle:

1. Using orange yarn, ch 12.
2. Row 1: sc in 2nd ch from hook and in each ch across. (11 sts)
3. Row 2: ch 1, turn, sc in each stitch across. Repeat this row until you have a small rectangle.
4. Fasten off and weave in ends.
5. Sew the buckle to the band, then sew the band to the hat.

Your Crochet Witch Hat is now ready to be worn! This delightful hat is sure to be a hit at any Halloween event.

Materials:

• Worsted weight yarn in green, purple, and orange
• 5mm crochet hook
• Yarn needle
• Stitch markers

Abbreviations:

• ch: chain
• sl st: slip stitch
• sc: single crochet
• hdc: half double crochet
• dc: double crochet
• st(s): stitch(es)
• inc: increase (2 sts in the same st)
• dec: decrease (2 sts together)

Instructions:

Brim:

1. With green yarn, ch 4, join with sl st to form a ring.
2. R1: Ch 2 (counts as first dc), 11 dc in ring, join with sl st to top of ch 2. (12 sts)
3. R2: Ch 2, dc in same st, 2 dc in each st around, join with sl st to top of ch 2. (24 sts)
4. Switch to purple yarn.
5. R3: Ch 2, dc in same st, dc in next st, 2 dc in next st, repeat from * around, join with sl st to top of ch 2. (36 sts)
6. Switch to green yarn.
7. R4: Ch 2, dc in same st, dc in next 2 sts, 2 dc in next st, repeat from * around, join with sl st to top of ch 2. (48 sts)
8. Continue alternating colors every round and increasing by 12 sts each round until you have the desired brim width.

Hat Body:

1. Switch to purple yarn and sc around the last row of the brim.
2. Work even in sc for 3 rows.
3. Begin decreasing: sc in next 10 sts, dec, repeat from * around.
4. Continue decreasing every 4th round, reducing the number of stitches between decreases by 1 each time, until you have 12 sts left.
5. Work even in sc until the top of the hat measures about 18 inches from the brim.
6. Finish off and weave in ends.

Buckle:

1. With orange yarn, ch 12, join with sl st to form a ring.
2. R1: Ch 1, sc in each ch around, join with sl st. (12 sts)
3. Finish off, leaving a long tail for sewing. Attach to the hat band.

Stars:

1. With green yarn, ch 2.
2. R1: 5 sc in 2nd ch from hook, join with sl st. (5 sts)
3. R2: Ch 3, sl st in next st, repeat around. (5 points)
4. Make as many stars as desired and sew onto the hat.

Enjoy your spooky and stylish crochet witch hat!

Materials:

• Worsted weight yarn in gray, orange, black, and a small amount of yellow
• Crochet hook size H/8 (5 mm)
• Tapestry needle
• Stitch markers
• Polyfill (for bats if needed)

Abbreviations:

• ch: chain
• sl st: slip stitch
• sc: single crochet
• hdc: half double crochet
• dc: double crochet
• inc: increase (2 sc in the same stitch)
• dec: decrease (sc two stitches together)

Hat Cone:

1. With gray yarn:
   • Magic ring, ch 1, 6 sc in ring. (6)
   • Rnd 1: 2 sc in each st around. (12)
   • Rnd 2: Sc in next st, inc around. (18)
   • Rnd 3: Sc in next 2 sts, inc around. (24)
   • Continue increasing by 6 sts each round until the diameter is about 6 inches.
2. Switch to orange yarn:
   • Work even in sc for 3 rounds.
3. Switch to black yarn:
   • Work even in sc for 2 rounds.
4. Switch back to gray yarn:
   • Continue working even in sc until the cone measures about 12 inches from the tip to the base.

Hat Brim:

1. With orange yarn:
   • Attach yarn to base of the cone, ch 1.
   • Rnd 1: Sc in next st, inc around. (36)
   • Rnd 2: Sc in next 2 sts, inc around. (48)
   • Continue increasing by 12 sts each round until the brim is about 3 inches wide.
2. Final round with gray yarn:
   • Sc in next st, sl st in next st around for a neat edge.

Belt and Buckle:

1. Belt (with black yarn):
   • Ch 60 (or enough to fit snugly around the hat), sc in each ch across.
   • Fasten off and sew around the base of the hat.
2. Buckle (with yellow yarn):
   • Ch 8, join with sl st to form a ring.
   • Rnd 1: Ch 1, 8 sc in ring, join with sl st.
   • Fasten off, leaving a long tail to sew the buckle onto the belt.

Bats and Stars:

1. Bats (with black yarn):
   • Ch 6, sl st in 2nd ch from hook and next ch, sc in next 2 ch, sl st in last ch. Fasten off, leaving a tail for sewing. Shape into bat wings and body.
2. Stars (with orange yarn):
   • Magic ring, ch 2, 10 hdc in ring, join with sl st. Fasten off and sew onto the hat.

Assembly:

1. Sew the bats and stars randomly around the hat.
2. Weave in all ends securely.

Your Crochet Witch Hat is now ready to enchant!

Crochet Strawberry Baby Hat Pattern

Hat Body:

1. Round 1: With red yarn, make a magic ring. Work 6 single crochets (sc) into the ring. Pull tight and join with a slip stitch (sl st) to the first sc. (6 stitches)
2. Round 2: Chain 1, 2 sc in each stitch around. Join with a sl st to the first sc. (12 stitches)
3. Round 3: Chain 1, sc in the next stitch, 2 sc in the next stitch around. Join with a sl st to the first sc. (18 stitches)
4. Round 4: Chain 1, sc in the next 2 stitches, 2 sc in the next stitch around. Join with a sl st to the first sc. (24 stitches)
5. Round 5: Chain 1, sc in the next 3 stitches, 2 sc in the next stitch around. Join with a sl st to the first sc. (30 stitches)
6. Round 6: Chain 1, sc in the next 4 stitches, 2 sc in the next stitch around. Join with a sl st to the first sc. (36 stitches)
7. Round 7: Chain 1, sc in the next 5 stitches, 2 sc in the next stitch around. Join with a sl st to the first sc. (42 stitches)
8. Rounds 8-15: Chain 1, sc in each stitch around. Join with a sl st to the first sc. (42 stitches)
9. Round 16: Change to pink yarn. Chain 1, sc in each stitch around. Join with a sl st to the first sc. (42 stitches)
10. Round 17: Chain 1, sc in each stitch around. Join with a sl st to the first sc. Fasten off and weave in ends. (42 stitches)

Leaves:

1. Leaf 1: With green yarn, chain 7.
   • Row 1: Single crochet (sc) in the second chain from the hook, half double crochet (hdc) in the next chain, double crochet (dc) in the next 2 chains, hdc in the next chain, sc in the last chain. Turn.
   • Row 2: Chain 1, sc in each stitch across. Fasten off and leave a long tail for sewing.
2. Repeat for 5 more leaves.

Stem:

1. Foundation Chain: Chain 6 with green yarn.
   • Row 1: Single crochet (sc) in the second chain from the hook and in each chain across. Fasten off and leave a long tail for sewing.

Assembly:

1. Sew the leaves onto the top of the hat, overlapping them slightly.
2. Sew the stem onto the center top of the leaves.
3. Using white yarn and a yarn needle, stitch small seeds randomly on the red part of the hat.