Crochet Gandalf Keychain: Your Magical Amigurumi Companion

This pattern will guide you through crocheting an adorable amigurumi wizard keychain, inspired by the wise Gandalf. It features a pointed hat, flowing beard, and a trusty staff, perfect for any fantasy fan.

**Skill Level:** Intermediate

**Finished Size:** Approximately 4-5 inches (10-12 cm) tall, depending on yarn and hook size.

---

**Materials:**

*   **Yarn:** (Sport or DK weight cotton or acrylic yarn recommended)
    *   Light Gray (for hat, robe, sleeves) - approx. 30g
    *   White (for beard, mustache, hair) - approx. 10g
    *   Flesh/Peach (for head, hands, nose) - approx. 10g
    *   Dark Brown (for staff) - approx. 5g
*   **Crochet Hook:** 2.5mm or 3.0mm (adjust as needed for your yarn to achieve tight stitches)
*   **Safety Eyes:** Two 6mm black safety eyes
*   **Stuffing:** Polyester fiberfill
*   **Yarn Needle:** For weaving in ends and assembly
*   **Scissors**
*   **Stitch Marker**
*   **Keychain Ring:** One metal keychain ring with chain

---

**Abbreviations:**

*   **MR:** Magic Ring
*   **ch:** chain
*   **sc:** single crochet
*   **inc:** increase (2 sc in one stitch)
*   **dec:** decrease (single crochet 2 together)
*   **sl st:** slip stitch
*   **BLO:** back loop only
*   **FO:** Fasten off
*   **st(s):** stitch(es)
*   **[...] x N:** Repeat instructions in brackets N times
*   **():** total number of stitches at the end of the round

---

**Instructions:**

Work in continuous rounds unless otherwise specified. Use a stitch marker to keep track of the first stitch of each round.

### 1. Head (Flesh/Peach Yarn)

R1: MR 6 sc (6)
R2: [inc] x 6 (12)
R3: [sc, inc] x 6 (18)
R4: [2 sc, inc] x 6 (24)
R5: [3 sc, inc] x 6 (30)
R6: [4 sc, inc] x 6 (36)
R7-R13: sc around (36) (7 rounds)
*Insert safety eyes between R10 and R11, approximately 7 stitches apart. Make sure they are centered.*
R14: [4 sc, dec] x 6 (30)
R15: [3 sc, dec] x 6 (24)
*Begin stuffing firmly and continue stuffing as you go.*
R16: [2 sc, dec] x 6 (18)
FO, leaving a long tail for sewing.

### 2. Body (Light Gray Yarn)

R1: MR 6 sc (6)
R2: [inc] x 6 (12)
R3: [sc, inc] x 6 (18)
R4: [2 sc, inc] x 6 (24)
R5: [3 sc, inc] x 6 (30)
R6-R12: sc around (30) (7 rounds)
*Stuff firmly and continue stuffing as you go.*
R13: [3 sc, dec] x 6 (24)
R14: [2 sc, dec] x 6 (18)
FO, leaving a long tail for sewing.

### 3. Hat (Light Gray Yarn)

R1: MR 4 sc (4)
R2: [sc, inc] x 2 (6)
R3: sc around (6)
R4: [2 sc, inc] x 2 (8)
R5: sc around (8)
R6: [3 sc, inc] x 2 (10)
R7: sc around (10)
R8: [4 sc, inc] x 2 (12)
R9: sc around (12)
R10: [5 sc, inc] x 2 (14)
R11: sc around (14)
R12: [6 sc, inc] x 2 (16)
R13: sc around (16)
R14: [7 sc, inc] x 2 (18)
R15: sc around (18)
R16: [2 sc, inc] x 6 (24)
R17: [3 sc, inc] x 6 (30)
R18: [4 sc, inc] x 6 (36)
R19: [5 sc, inc] x 6 (42)
R20: BLO sc around (42) - *This creates a defined brim edge.*
R21: [6 sc, inc] x 6 (48)
R22: sc around (48)
Sl st to next st, FO.
*Lightly stuff the top (pointed part) of the hat to help it keep its shape. Do not stuff the brim.*

### 4. Arms (Make 2)

**Start with Flesh/Peach Yarn**
R1: MR 4 sc (4)
R2: [sc, inc] x 2 (6)
R3: sc around (6)
**Switch to Light Gray Yarn**
R4-R9: sc around (6) (6 rounds)
FO, leaving a long tail for sewing. Do not stuff.

### 5. Staff (Dark Brown Yarn)

R1: MR 4 sc (4)
R2-R12: sc around (4) (11 rounds)
*To create the knobbly top:*
R13: [inc, sc] x 2 (6)
R14: sc around (6)
R15: [dec] x 3 (3)
FO, cut yarn, and use the tail to close the remaining hole. Lightly stuff if desired to make it sturdier. Leave a tail for sewing.

### 6. Beard (White Yarn)

R1: ch 6, sc in 2nd ch from hook, sc in next 4 ch (5) (This is the top edge of the beard)
R2: ch 1, turn, inc, sc in next 3 st, inc (7)
R3: ch 1, turn, sc in next 7 st (7)
R4: ch 1, turn, inc, sc in next 5 st, inc (9)
R5: ch 1, turn, sc in next 9 st (9)
R6: ch 1, turn, inc, sc in next 7 st, inc (11)
R7: ch 1, turn, sc in next 11 st (11)
R8: ch 1, turn, dec, sc in next 7 st, dec (9)
R9: ch 1, turn, sc in next 9 st (9)
R10: ch 1, turn, dec, sc in next 5 st, dec (7)
R11: ch 1, turn, sc in next 7 st (7)
R12: ch 1, turn, dec, sc in next 3 st, dec (5)
FO, leaving a long tail for sewing.

### 7. Mustache (White Yarn)

R1: ch 9, sl st in 2nd ch from hook, sc in next 2 ch, hdc in next 2 ch, sc in next 2 ch, sl st in last ch.
FO, leaving a tail for sewing. This creates a slightly curved mustache piece.

### 8. Hair/Sideburns (White Yarn)

Cut several strands of white yarn, each about 4-5 inches (10-12 cm) long. Using your hook, loop 3-4 strands through stitches on each side of the head, just above where the beard will sit and below where the hat will cover. Tie them securely and trim to desired length, creating shaggy sideburns.

---

**Assembly:**

1.  **Head and Body:** Using the long tails, sew the head securely to the body. Make sure they are aligned.
2.  **Facial Details:**
    *   **Nose:** Using flesh/peach yarn and a yarn needle, embroider a small vertical stitch or a few small horizontal stitches for the nose, centered between the eyes, 1-2 rows below.
    *   **Mustache:** Position the mustache piece directly below the nose and sew it in place.
    *   **Beard:** Position the beard piece below the mustache, covering the chin. The top edge of the beard should gently tuck under the mustache. Sew it securely to the head.
3.  **Hat:**
    *   Thread the keychain ring through the very top of the hat (around R1 or R2) before attaching it to the head. Secure it firmly.
    *   Place the hat on the wizard's head, ensuring the safety eyes are visible and the sideburns peek out. Sew the brim of the hat securely to the head all the way around.
4.  **Arms:** Sew the arms to the sides of the body, just below the neck seam.
5.  **Staff:** Position the staff in one of the wizard's hands and sew it securely in place. You can add a tiny stitch from the staff to the body for extra stability if needed.
6.  **Finishing:** Weave in all remaining loose ends.

Your amigurumi wizard keychain is now complete! Enjoy your little companion.